Find Your Machine
Filter our full catalogue by industry, category, and region. Or speak directly to sales for tailored advice.
261 products
ATIS Acer
Double rope pneumatic balancer range. Made in Italy zero gravity balancers for loads up to 150 kg, ultra compact with a redundant double safety rope, ideal for low ceilings and tight overhead space.
ATIS Ferax
Lever type pneumatic manipulator. An exceptionally light, compact balancer with very low movement inertia, for fast, high intensity handling cycles in tight spaces.
ATIS Gripping Systems
Custom gripping tools for ATIS manipulators, designed and built in house. Vacuum cups, mechanical and pneumatic clamps, magnets, integrated forks and hook systems, matched to the product, the space and the production line.
ATIS Hook Gripping Systems
Custom-engineered gripping solutions designed to handle virtually any product safely, efficiently and ergonomically within industrial production environments.
ATIS Integrated Fork Gripping Systems
Custom integrated fork tools for fast, stable handling of pallets, boxes, sheets and bulky loads in tight spaces, with millimetric control and superior manoeuvrability.
ATIS Linear
Vertical sliding pneumatic manipulator on overhead rails. Linear guide travel gives oscillation free, millimetric vertical handling of large, heavy loads up to 800 kg across wide working areas.
ATIS Magnet Gripping Systems
Permanent magnet gripping tools for fast, damage free handling of steel sheets, plates, tubes and ferrous components, with safe and (under a new patent) instantaneous magnetic grip.
ATIS Mechanical Clamp Gripping Systems
Mechanical clamp tools, each custom designed to the workpiece, for a stable, precise grip on products of any shape and size in intensive industrial cycles.
ATIS Mirus
Advanced rigid-arm zero-gravity manipulator delivering exceptional precision, stability and ergonomics for the handling of complex industrial loads.
ATIS Pneumatic Clamp Gripping Systems
Compressed air gripping tools for millimetric precision handling of cylindrical, hollow and complex parts, integrating with production lines, robots and end of arm tooling.
ATIS Vacuum Cup Gripping Systems
Suction cup gripping tools for the safe, mark free lifting of glass, panels, sheets and bulky or delicate loads, integrated into ATIS pneumatic manipulators as true zero gravity systems.
Automatic Assembly Lines
The Atlantic computerised assembly line optimises insulated glass unit production, seamlessly handling double and triple glazed units in automatic mode, with options for semi-automatic and wash-only m
BBT 01 START
Entry level horizontal edging machine for grinding and polishing the flat edges of sheet glass and mirrors from 3 mm to 12 mm thick.
BBT 02N
Shape edging machine for grinding and polishing flat or round glass edges from 3 mm to 12 mm, with C profile, trapezoidal or flat finishes.
BBT 03 UNI
Shape edging machine for flat or round glass edges from 3 mm to 12 mm thick, with an adjustable wheel angle and two wheels per spindle.
BM 11
Flat belt edging machine for grinding and smoothing the edges of small to medium glass pieces, with a 21 m per minute abrasive belt.
BM01 ALTO
Belt edging machine for grinding and smoothing sheet glass edges from 3 mm to 12 mm thick, with a 21 m/min abrasive belt.
BTS 01 START
Single spindle vertical edging machine for grinding and polishing the flat edges of sheet glass from 3 mm to 10 mm thick.
BTS 02 GAMMA
Double spindle vertical edging machine with a variable speed conveyor, grinding and polishing glass from 2 mm to 16 mm in one pass at up to 6 m per minute.
BTS 02 GAMMA PLUS
Larger double spindle vertical edging machine with a variable speed conveyor, grinding and polishing glass from 2 mm to 16 mm in one pass at up to 6 m per minute.
Battelino Bevellers
Battellino, founded in 1990, has been producing glass machines from the Paluzza factory since the companies inception over 3 decades ago. Their mission to provide customers with the best quality and p
Battelino Edgers & Bevellers
Molatrice rettilinea FP7.mp4 from Stone & Glass Group on Vimeo
Battelino IGU
Sealing Robot for insulating glass from Stone & Glass Group on Vimeo
Bovone 251 & 252
The Bovone 2 Series straight line bevelling machines, models 251 and 252. The right mix of investment, management and performance for shops that will not compromise on bevel quality.
Bovone 251+1
Straight line bevelling machine from the Bovone 2 Series. Grinds and polishes the bevel, edge and front arris in a single pass, with a dedicated wheel adding quality to the front arris.
Bovone 361+2
Straight line bevelling machine for cerium polished bevel, pencil edge grinding and front arris. Built for the perfect polishing of thicker front arrises.
Bovone 461+1
The multifunctional Bovone 4 Series beveller. Bevel polishing with an excellent cerium finish, pencil edge grinding and front arris grinding in a single pass.
Bovone 462
Straight line bevelling machine that combines excellent bevelling with fine pencil edge finishing. Designed for uncompromising quality.
Bovone 471
Straight line bevelling machine with a wheel configuration designed for very high speeds, able to work glass even of small dimensions.
Bovone BVR Vertical Washing Machine
Bovone vertical glass washing machines. Sturdiness, performance and high integration in complete lines, washing and drying slabs up to 3300 mm high.
Bovone BWM Horizontal Washing Machine
Modular horizontal glass washing machines in useful widths from 1600 to 3300 mm, built for the daily demands of industrial glass washing.
Bovone ELB 10
Straight line edging machine for polishing the flat edge with liquid cerium. Great levels of finish for production of particular value.
Bovone ELB 10+1
Straight line edging machine with an integrated dubbing device for complete automation, ready for integration with robotic handling.
Bovone ELB 10/45
Variable angle straight line edging machine for flat or inclined edges, with excellent polishing thanks to liquid cerium.
Bovone ELB 102
Straight line edging machine for flat edge production that combines high output with marked versatility. The edger for flexible, demanding work.
Bovone ELB 11/45
Variable angle straight line edging machine for flat or inclined edges, with an extra wheel dedicated to edge polishing for perfect finishes and high productivity.
Bovone ELB 12 HS
Straight line edging machine from the 12 Series for excellent finishing at high speed, with constant quality over long runs.
Bovone ELB 12/100
Straight line edging machine from the 12 Series, designed for large thicknesses up to 100 mm while keeping Bovone polishing standards.
Bovone ELB 14
Straight line edging machine delivering high polishing standards on the flat edge and, with two dedicated wheels, on the arrises. Designed to work small pieces.
Bovone ELB 14/45
Variable angle straight line edging machine that grinds and polishes flat and inclined edges and arrises in a single pass, on thicknesses up to 90 mm.
Bovone ELB 17/45
Top of the range variable angle straight line edging machine for state of the art flat edge, bevel and arris polishing in a single pass.
Bovone ELB 9+2
Straight line edging machine that performs grooving, flat edge and arris in a single pass, producing precise grooves for perfect couplings between slabs.
Bovone Evatherm EVA Laminating Oven
Evatherm is Bovone’s new stand alone oven for laminating glass with EVA film, combining simplicity, efficiency and versatility.
Bovone Glass Laminating Line
Complete, fully customisable glass laminating plants offering reliability, productivity and versatility, with the option of Bovone’s latest generation hybrid convection oven.
Bovone Glass Silvering Lines
Fully automated mirror silvering lines with over seventy years of Bovone heritage. Glass enters and a finished mirror comes out, on lines customised to each customer.
Bovone Glass Tools
BDT diamond tooling for flat glass processing, from cup and peripheral wheels to arris polishing wheels, engineered for precision, efficiency and durability.
Bovone Integrated Robotic System
The Bovone Robotic System integrates edging machines with multi axis robots to automate grinding, raising productivity with lower costs and greater operator safety.
Bovone Jolly 4.0
The 45° flat edge straight grinding machine, ideal for preparing edges that must be joined by gluing. The perfect tool for making inclined edges on slabs to be joined.
Bovone Stone Tools
BDT stone processing tools, from reliable standard solutions to high speed configurations, including the Blue Line for ceramic and new generation synthetic materials.
Bovone Stonedge 10
Straight line grinding machine for flat edge and arrises with great polishing results. The perfect solution for making samples.
Bovone Stonedge 11/45
Variable angle machine for flat edge and arrises, delivering high precision, speed and versatility on stone.
Bovone Stonedge 15/45
Automatic variable angle straight line grinding machine for simultaneous flat and inclined edge processing, with thickness calibration and continuous or discontinuous arrises.
Bovone Stonedge 15/45 Radius
Automatic variable angle straight line edging machine for simultaneous flat or inclined edge, calibration and edge radius. The best solution for making kitchen tops.
Bovone Stonedge 9+1
The Stonedge 9+1 ceramic flat edge polisher, an ideal solution for processing ceramic kitchen countertops, combining multiple processes in one machine.
BowScanner
Deflection measurement that detects overall bow in tempered and laminated glass to minimise breakage risk and downtime.
Brembana Formax
Numerically controlled 5-axis bridge saw with tilting head and fixed table for cutting, 3D profiling and milling marble, granite, composite stone, ceramic and stone blocks.
Brembana Gixa
Large-sized 5-axis CNC bridge saw with a Z-stroke up to 1,400 mm and disks up to Ø1,200 mm. The best CMS solution for machining large slabs and stone blocks.
Brembana Kosmos
New generation 5-axis monoblock bridge saw. Compact, needs no foundations, and cuts natural stone, synthetic stone and ceramic slabs up to 200 mm thick with a Ø625 mm blade.
Brembana Kosmos Jet
5-axis monolithic saw jet machine combining a diamond disk and abrasive waterjet to automate cutting of natural stone, composite and ceramic slabs, including internal angles.
Brembana Kratos
New generation 5-axis open frame CNC bridge saw for fabshops and automated lines. Cuts hard stone blocks up to 250 mm thick down to thin ceramic worktops, using three on-board tools.
Brembana Sprint
CNC 5-axis bridge saw with a 4,250 mm bridge stroke for large slabs and blocks. Cutting, 3D profiling and milling on marble, granite, composite stone and ceramic.
Brembana Sprint Jet
5-axis saw jet machine combining a diamond disk with an integral abrasive waterjet head for variable and small-radius cuts impossible with a disk alone.
CMS Brembana Aura
CMS recently acquired GFP, a venetian company specialized in cutting tables and automatic seaming machines for glass processing The operation allows CMS Glass Technology to enforce in a strategic way
CMS Glass Waterjets
Smartline is designed to redefine industry standards of excellence by improving operating efficiency, while maintaning CMS’ renowned reputation for unparalleled construction and working quality. It in
CMS Sawjet
Cms Stone Sawjets are a Numerically Controlled stone bridge saws with five axes (X, Y, Z, C, B) combinded with CMS/Brembana’s Tecnocut Waterjet system and is suitable for cutting slabs in marble, gran
CMS Stone Horizontal CNC
CMS SpA manufactures cnc machines and systems for advanced materials (composite, carbon fibre, aluminium, light alloys), plastic, glass, stone and metals processing.
CMS Waterjet Cutting for Stone
CMS SpA manufactures cnc machines and systems for advanced materials (composite, carbon fibre, aluminium, light alloys), plastic, glass, stone and metals processing.
Compact 4C
High speed evolution of the Compact Series with four columns for a wider printing head, made for cooktops and household appliance glass, including drilled glass.
Compact Series
Flexible screen printing machine for squared and rectangular glass, usable stand alone, semi automatic or as the heart of a full automatic line.
Compact Vertical Glass Washer
The Atlantic Compact range of vertical washers are designed for applications where space is limited. High-quality components are assembled in a compact stainless steel box sectional frame. These washe
Computer Spacer Bar Saw
The computerised Spacer Bar Cutter has been designed to utilise sealed unit batch data , either by data stick or part of a network. The saw is accurate, fast to operate with the bar stop moving automa
CulletScanner
Automatic fragmentation image analysis for tempered glass, with optional anisotropy and edge stress functions.
DTS 45
Glass crushing machine for easy waste disposal. Crushes glass, including wired glass, at up to 400 kg per hour into a 0.1 mm to 20 mm grain.
Digital Printing Dryers
IR-J dryers tuned for digital printing on glass, with a soft diffusion ventilation system that protects sensitive inks and cures ink layers up to 100 microns.
Digital Spacer Bar Saw
Our Digital Spacer Bar Saw provides a faster, safer and more accurate means of cutting either spacer or Georgian bar. The operator can remain in one position adjusting the stop distance with an easy
Double Glasses Series
The G DLE (Double Lite Edition) prints two small glasses or one large glass on a single line, with an 18 axis centring system for highly shaped automotive glass.
Dryers (IR, UV and Combi)
Industrial IR, UV and combined IR/UV drying systems for automated flat glass printing lines, with precise thermal control and energy saving lamp management.
Fast Series
High speed home appliance printing machine with digital caliber height control, anti drip printing bridge and recipe driven changeover, up to 600 glasses per hour.
Firstfill & Interfill Gas Fillers
With touchpad controls, they allow easy gas percentage adjustments and offer adjustable flow rates suitable for smaller production volumes. Some IGA10 versions are compatible with Krypton or Xenon gas
Flexy Series
Versatile manual load screen printing machine with a magnetic vacuum table, ideal for small and varied lots of thin, coated, standard or polycarbonate glass.
Fratelli Pezza Automatic Sandblasters
Fratelli Pezza Sandblasters from Stone & Glass Group on Vimeo
Fratelli Pezza Easymarkers
Fratelli Pezza Easymarker UP Sandblaster from Stone & Glass Group on Vimeo
Fratelli Pezza Sandblasters
Fratelli Pezza Sandblasters from Stone & Glass Group on Vimeo
G Series
Fully automatic flat glass screen printing machine with walking beam transport and a six pin auto centring system, built for high volume automotive production.
Georgian Bar Staple Table
Our Georgian Staple Table is the ideal production aid for Georgian Bar and other specialist internal grills. The table and special clamps allow the frames to be produced perpendicular and the Georgian
Glass Drilling & Milling - CMS Vertec
CMS Ypsos - CNC Vertical machine from Stone & Glass Group on Vimeo
Glass Horizontal CNC
CMS GLASS TECHNOLOGY Official video- ENGLISH VERSION from Stone & Glass Group on Vimeo
Hand Held Edge Deleter
The Straight Line Edger ASM945A is a multi-stage edger equipped with 9 spindles. It performs bottom edge grinding and polishing, with ground and polished arrises at the front and rear. Additionally, i
Handling Systems
Modular glass handling systems for transporting, lifting, rotating and stacking flat glass of any size and shape, fully synchronised with the production line.
Harps System (Symphonia)
Symphonia automated harps rack system for loading and unloading glass onto vertical lines such as insulating glass, for small and medium glassworks.
Horizontal Double sided Glass Drill
Introducing the Atlantic ZK100 Horizontal Double-Sided Drilling Machine. With top/bottom drill heads, laser or mechanical centering, and pneumatic clampers, it offers precise drilling with minimal gla
Horizontal Edge Deleter
The Straight Line Edger ASM945A is a multi-stage edger equipped with 9 spindles. It performs bottom edge grinding and polishing, with ground and polished arrises at the front and rear. Additionally, i
Hot Melt Machine HM 1000
Entry-level hot melt sealing machine for insulated glass production, delivering reliable performance with a variable output of up to 1,000 g/min.
Hot Melt Machine HM 1500
Compact hot melt sealing machine for insulated glass production, offering reliable performance with a variable output of up to 1,500 g/min.
Hot Melt Machine HM 2000
Compact hot melt sealing machine for insulated glass production, delivering reliable performance with a variable output of up to 2,000 g/min.
Hot Melt Machine HM 3000
Powerful hot melt sealing machine for medium to large insulated glass manufacturers, delivering variable output up to 3,500 g/min.
Hot Melt Machine HM 5000
High-output hot melt sealing machine for insulated glass production, delivering reliable performance and variable output up to 5,500 g/min.
Hot Melt Machine SA Extra Robot
High-output hot melt supply system for automated sealing robots, featuring automatic changeover technology for uninterrupted production.
Hot Melt Machine SA Robot
Automated hot melt system for sealing robots, based on the proven. Designed for continuous production, high output and seamless integration.
Hot Melt Sealant Gun
Ergonomic hot melt sealant gun with a heat-resistant handle, CNC-machined brass body and 340° swivel rotation. Compatible with most hot melt sealing machines.
Hydraulic Tilting Table
This PLC-controlled machine efficiently presses pre-assembled units with Poly-Iso-Butylene (PIB) applied to the spacer bar, creating a primary sealed unit ready for gas filling and final sealing. It's
J Series
Fully automatic flat glass screen printing machine with belt transport and auto centring, covering formats up to 2700 x 1600 mm for architectural and automotive glass.
Line Automation Software
Dedicated PLC/HMI software for full control of the printing and handling line, with part tracking, recipe management, diagnostics and remote assistance.
LineScanner
All in one quality inspection of flat glass using Softsolution's unique parallel light scanning technology.
LineScanner Reflection
Reflection based scanning that makes white haze on tempered glass visible for reliable, stable detection.
LiteSentry - Fault & Defect Systems
Our extensive line of high-quality inspection systems correct the most frequent problems found in glass manufacturing today. We pride ourselves on holding our systems to the highest standards in the i
LiteSentry - Osprey 10
Osprey® 10 advance inspection system from Stone & Glass Group on Vimeo
Logo Print Station
Dedicated station that centres and prints a logo on the glass below, with independent squeegee and flood bar control and its own PLC.
Manual Spacer Bar Alignment Rack
A Manual Spacer Bar Alignment Rack is a tool used in insulated glass unit (IGU) fabrication to ensure accurate alignment of spacer bars. It features adjustable guides for manual positioning, ensuring
Maroso Glass Autoclave
Tailor made autoclave for laminating flat, curved and special glass, both tempered and hardened, with precise control of pressurisation, heating and depressurisation for a high quality laminating process.
Maroso Marble Autoclave
Tailor made autoclave for marble, ceramic conglomerate, porcelain stoneware and conglomerate compaction, sized to the cycle loading required for maximum efficiency and uniform results.
Mazzaroppi CS Bending Furnace
Mould glass bending furnace for architectural glass, producing varied curved shapes from box loaded moulds with the lowest energy consumption in the industry.
Mazzaroppi HST Heat Soak Test Oven
Heat soak test oven for tempered glass, running a controlled 290 degree C cycle with independent heating sections and a detailed report for every cycle.
Mazzaroppi LM Revolution
Patented glass laminating furnace for laminated glass of varying thicknesses, with two patented systems for higher speed and low plastic spillage.
Mazzaroppi Special Machinery
Bespoke glass plants built from scratch to customer specification, combining processes such as roller bending, die bending and flat tempering into a single all in one line.
Mazzaroppi TC Tempering and Bending
Highly customisable glass tempering and bending plant, tailored to the customer for sectors from shower stalls and automotive to architecture and solar.
Mazzaroppi TP Advanced
Flat glass tempering plant for medium to large glassworks, cutting energy use by up to 70% with the patented Eco Convection system.
Mazzaroppi TP Compact
Compact glass tempering furnace for small and medium glassworks, bringing tempering in house with smartphone simple controls and the lowest consumption on the market.
Mistrello CE Rack Shuttle System
Extractable rack shuttle system for storing different types of glass in restricted height buildings, feeding an unlimited number of racks to an unlimited number of cutting lines from a single loading area.
Mistrello CS Modular Loader
New generation fixed modular loader that picks glass sheets from both sides and transfers them to the cutting bench, with an excursion of up to 1000 mm.
Mistrello Compact Storage for Marble Slabs
Modular compact storage for marble and stone slabs. Moveable frames compact together so stored material occupies about one third of the space of traditional A frames.
Mistrello GL Loader
Suction cup loader and unloader running on rails. Picks glass sheets from compact storages or traditional fixed racks and transfers them to the cutting table.
Mistrello GL Stock Selectors (GLP and GLH)
Aerial stock selectors that lift and transport PLF glass sheets from 3 mm to 19 mm, including low-E glass. Interface with automatic compact storages or unload from fixed racks and directly from the lorry.
Mistrello Lifting Grabs
Steel tubular lifting frames for handling packs of glass safely. Three models from 3000 kg to 5900 kg capacity, with adjustable feet, brackets and positive locking.
Mistrello Racking
Compact glass vertical racking is composed of moveable frames which slide over properly dimensioned rails, which are compacted among them and allow the operator to create the space for loading / unloa
Mistrello Re-Store Buffer System
Storage system for single glass panes that automatically recovers remnant glass from cutting optimisation, or acts as a buffer so the cutting line never stops. Accepts sheets from a minimum size of 1000 x 1000 mm.
Mistrello Store Pro Warehouse Software
Warehouse management software offered as an option on Mistrello plants. Tracks the position, measurements and traceability of every slab in the warehouse.
Mobile Glass Freefall Rack
The Straight Line Edger ASM945A is a multi-stage edger equipped with 9 spindles. It performs bottom edge grinding and polishing, with ground and polished arrises at the front and rear. Additionally, i
Multifill Argon/Krypton Gas Fillers
The Multifill range is versatile, compatible with all inert gases and mixtures for insulated glass. Multifill-1 provides adjustable flow control (1-15 liters/min), optimizing Argon filling for speed w
Oven & Dryer
Industrial heat treatment ovens and dryers delivered as a turnkey line, drawing on more than 400 applications across ink curing, chemical, metallurgy and rubber and plastic.
Overhead Spacer Bar Conveyor
Used for the temporary storage and movement of spacer bar frames, the overhead conveyor keeps pre-butyled and double-sided taped frames separate, and is available in many sizes.
PTS 325 PORTA
Vertical laminated glass saw for cutting normal, laminated, fire resistant and bullet resistant glass up to 60 mm thick, with square and 45 degree cuts.
Pellegrini Beton Cutting and Controlled Demolition Machines
Automatic system ideal for cutting beams, structural components and other high – strength prestressed concrete elements using diamond wire technology.
Pellegrini DF 1200 SHV
This compact and versatile monowire is designed for the squaring, vertical and horizontal cutting of stone blocks, as well as the production of thin slabs through stone panel splitting. It offers a us
Pellegrini DF 2000/2400/2500/3000
Monowire gangsaw is designed for efficient block squaring and precise slab cutting. It features hydraulic wire tensioning, an inverter for wire speed control and an integrated PLC system. The intuitiv
Pellegrini Diamantfil ®
This machine is designed for precise block squaring and slab cutting. With electronic wire tensioning, and inverter for accurate wire speed control and a PLC system with touchscreen interface for intu
Pellegrini Dodecawire
A multiwire machine featuring a big motor drum on the drive side and 12 big tensioning flywheels, each independent of the other. This lets the operator change thicknesses manually, without the need to
Pellegrini Double Top
A stationary machine for the simultaneous execution of two parallel cuts, to obtain slabs, thicknesses, or single cuts for squaring blocks of stone material.
Pellegrini Eptawire VVV
A 7 wire multiwire plant featuring 7 large diameter motor flywheels, 7 large diameter tensioning flywheels to maximise cutting performance, and 7 independent wire guide wheels for maximum flexibility.
Pellegrini Ikosiwire
The latest born IKOSIWIRE is designed to ensure precision and flexibility in cutting slabs and mixed thicknesses with 23 installable wires, for thicknesses up to 5 cm. Wide working range, with a maxim
Pellegrini Magicwire 16
A multiwire characterised by an innovative and compact geometry. It enables 16 cuts from 2 to 6 cm thick, with the ability to cut bigger thicknesses by reducing the number of wires.
Pellegrini Magicwire 16 XL
A multiwire characterised by an innovative and compact geometry. It enables 16 cuts from 2 to 9 cm thick, with the ability to cut bigger thicknesses by reducing the number of wires.
Pellegrini Pentawire
Multiwire for the simultaneous cutting of 5 slabs of different thicknesses. Equipped with a large diameter motor drum and 5 large diameter tensioning flywheels. The thicknesses of the slabs to be cut
Pellegrini Pneumatic Drilling Series
This robust pneumatic block cutter/perforator features one or two hammers with automatic thrust adjustments for optimal performance. Equipped with a pneumatic motor for smooth rail travel and a built-
Pellegrini Polyone
An innovative multiwire system capable of cutting 20 slabs, 1 cm thick each, using 10 wires, with each wire performing two cuts.
Pellegrini Polywire 40
A 40 wire machine characterised by a large diameter motor drum, 40 independent large diameter tensioning flywheels, and two guide drums that guide the wires in and out of the block.
Pellegrini Polywire 5S
Multiwire for the simultaneous cutting of 5 slabs of different thicknesses. Equipped with a large diameter motor drum, 5 large diameter tensioning flywheels, and two guide drums that guide the wires i
Pellegrini Profiling Machines
An innovative monowire shaping machine designed for the precise machining of complex three-dimensional stone profiles.
Pellegrini Quarry Machines
Pellegrini have been taking care of customers for more than 70 years.
Pellegrini Surface Processing Lines and Machines
A versatile system capable of delivering a wide range of surface finishes- typically achievable only using multiple machines.
Pellegrini Telediam Series
Electric diamond wire cutting machine for block squaring and mountain cuts.
Pneumatic Spacer Bar Alignment Rack
A Pneumatic Spacer Bar Alignment Rack is a specialised tool used in insulated glass unit (IGU) fabrication to ensure precise alignment of spacer bars. It utilises pneumatic mechanisms for quick and ac
Putsch Meniconi SVP 1080
Automatic vertical panel saw for cutting thick laminated, armoured, bullet resistant and fire resistant glass, making both vertical and horizontal cuts without moving the sheet.
R&R AKT and Quadrobot
Georgian bar assembly range, from the AKT measuring and fixing table to the fully automatic R&R Quadrobot with six axes and four screw heads, with screw fixing for low psi profiles.
R&R Altimeter
Pressure compensation device for triple insulating glass, setting the internal pressure during production to suit the atmospheric conditions at the final installation site.
R&R Bendit
Fully automatic spacer frame bender that shapes almost all common standard and hybrid profiles, with integrated radius bending and Swisspacer and Multitec processing.
R&R Consumables
Consumables for insulating glass production, from molecular sieve to Georgian bar connectors, end plugs and rattle protection.
R&R DB-VE Georgian Bar Drilling
Fully automatic double drilling device for precisely aligned, centred holes in continuous Georgian bars, for a perfect crossbar connection, with a manual BTD alternative.
R&R Decoating
Mobile and attachable decoating devices, HSG and ASG, for removing the coating from the edge of insulating glass panes to secure the durability of the edge bond.
R&R DesIQuant
Spacer frame filling machine that fills frames with molecular sieve under precise weight control, for spacer sizes 6 to 32 mm, with automatic butyl closure of the holes.
R&R Georgian Bar Processing
A full machine portfolio for Georgian bar production, from manual saws, milling machines and drilling jigs to assembly tables and fully automatic screw driving robots.
R&R HRF-MZ Georgian Bar Milling
Georgian bar milling machine that mills up to 10 bars of one geometry at once with integrated pre cutting, supported by the HRF and the MKS mini cutting saw.
R&R MGS Georgian Bar Saw
Hand lifted Georgian bar mitre saw for straight, virtually burr free cuts, combined with the LAS length stop and AT feeding table for an optimal production flow.
R&R PWM-XL Magazine
Scalable profile change magazine of up to 25 compartments and over 5000 m capacity, feeding R&R spacer benders and welding machines for uninterrupted production.
R&R Packaging Systems
Bespoke packaging machines built to your product, for reliable bundling, separation, positioning, destacking and final finishing of small items or long goods.
R&R SAE Saw and LAS-A
Combination of the SAE double saw and LAS-A length stop with production software, for precise manual spacer cutting and keying with online connection and printer control.
R&R SB Georgian Bar Bender
Bending machine for all common Georgian bar profiles, with special plastic rollers that bend finished coated bars and electronic axis positioning.
R&R Spacer Processing
R&R machinery for every step of spacer bar production, from manual sawing lines to fully automatic bending and frame welding systems, including low psi profiles such as Swisspacer.
R&R Staple Tables
Rottler und Rudiger AKT Staple Table from Stone & Glass Group on Vimeo
R&R Transport Trolleys
Trolleys and racks for moving spacer frames, Georgian bar grids and prepared parts safely and efficiently within insulating glass production, standing or hanging.
RP 210
Polycarbonate cutter for multiwall sheets up to 20 mm thick. Single person operation, laser cut guidance and clean, burr free cuts.
RP 210 F
Polycarbonate cutter for sheets up to 25 mm thick, with adjustable cutting speed, laser cut guidance and a low loading edge for large formats.
Robotic Applications
Up to six axis anthropomorphic robots for material handling and vision guided processing, programmed in house and integrated into Cugher or existing lines.
Roller Press
This PLC-controlled machine efficiently presses pre-assembled units with Poly-Iso-Butylene (PIB) applied to the spacer bar, creating a primary sealed unit ready for gas filling and final sealing. It's
Rotary Sealing Tables
The Rotary Sealing Table facilitates controlled application of sealant onto pre-assembled glass units. It allows users to adjust the speed of the sealing process and provides a comfortable working hei
Sasso Bull 126
A compact, entry level edge polisher that finishes flat and bullnose profiles precisely, ideal for workshops needing quality in a small footprint.
Sasso Evolution
A high precision edge polisher with optimised spindle layout that speeds up profiling and polishing of complex profiles in thick materials.
Sasso F-Top
A high end marble slab surface polisher with up to 3 calibrators and up to 12 polishing heads, built for high quality, high volume finishing.
Sasso Fl@t
A self setting edge polisher that automatically adjusts head pressure and stores named machining recipes, delivering effortless, repeatable results on complex profiles.
Sasso Flat 10
The ten spindle flagship of the horizontal Flat family, built for high speed, high precision machining of thick flat edges up to 10 cm on large volumes.
Sasso Flat 6
A horizontal six spindle edge polisher for precise, versatile machining of flat edges and bevels, suited to large scale production of countertops up to 6 cm thick.
Sasso Flat 8
A horizontal eight spindle edge polisher built for intensive, high speed polishing of flat edges, easily working thicknesses up to 10 cm.
Sasso Flying Bull
A compact, cost effective bullnose and flat edge polisher under 5 metres long, configurable with multi purpose spindles for special machining.
Sasso Flying Flat
A compact, manually programmable vertical edge polisher built for high productivity in a small footprint, ideal for kitchen countertops and wall coverings.
Sasso K-Lux
A compact single head bridge polisher for marble, granite, stone and agglomerates, able to polish, bush hammer and antique slabs in one machine.
Sasso K600
A 5 axis CNC bridge saw delivering precise, fast cuts on stone with up to 200 mm cutting depth and a robust hot dip galvanised structure.
Sasso K600 Extreme XL Manipulator
A 5 axis CNC bridge milling machine with an integrated suction cup system up to 500 kg, combining disc and milling tool cutting with built in material handling.
Sasso K600 Ultimate
A heavy duty 5 axis CNC bridge saw with an 18.5 kW motor and a large 3500x2000 mm bench, built for intensive, high definition stone cutting.
Sasso K600 Ultimate Double Bench
A 5 axis CNC bridge milling machine whose dual bench layout cuts downtime and boosts productivity for high volume stone processing.
Sasso K600 Ultimate J
A compact, high performance combined milling machine and waterjet, built as a 5 axis interpolated CNC bridge milling machine for any laboratory.
Sasso K600 Ultimate J XL
A 5 axis CNC milling machine combining disc cutting and waterjet precision, capable of processing large format plates up to 4000 mm.
Sasso K600 Ultimate XL
A large format 5 axis CNC milling machine with a 360 degree rotary head and 3600x2000 mm worktable, built for high volume work on big slabs.
Sasso K725
A 5 axis CNC cutting and milling machine offering up to 260 mm cutting depth and DXF based programming for everything from engravings to bas reliefs.
Sasso K900
A large capacity 5 axis CNC milling machine with a 900 mm disc, up to 310 mm cutting depth and a swivelling, tilting head for machining oversized materials.
Sasso Revolution
A combination edge polisher with a dual spindle bar that produces and polishes complex toroidal profiles faster than traditional edge polishers.
Sasso Seven
A wide bodied edge polisher offering maximum versatility on complex profiles, with room for additional spindles and machining up to 10 cm thick.
Sealed Unit Clamping Tables
The Sealed Unit Clamping Table, or Edge Press, complements hot melt sealant equipment. Designed for one-person operation, it efficiently seals units with or without primary spacer frame location. Cont
Sigma Dust Extraction
The dust-intaking Modulbox solves the problems connected with the powder produced by the working of marble and granite. Sigma produces two different models for dust extraction for stone working factor
Sigma Water Treatment
Sigma Group offers two solutions for stone water treatment, the 'big bag' sludge depuration system, and the 'filter press' depuration system; both of which are built to the high-quality standards that
Sketch Series
Screen printing machine for building and interior design glass, from 600 x 550 mm up to 2700 x 1600 mm, with a movable screen for personalised prints.
Smartfill 1, 2 and 4 Lines
The Smartfill-1 is a single line 30 litre a minute machine designed for the production of Argon gas filled insulated glass units. The Smartfill-1 is the first machine in the Inagas range to be equippe
Smartspeed Highspeed Gas Fillers
The Smartspeed range is available as either a single or twin line machine designed for high speed Argon gas filling.
Sparklike Gas Measurement
Non-destructive insulating gas measurement using Sparklike Handheld and Laser Portable devices, available to rent from R&R with experienced operators.
Steinex Automatic Lines
Fully automatic Menhir and Sherpa lines and CUB AUT plants for producing cubes, slabs and boulders from sawn monolithic blocks.
Steinex Broadway
Double frame splitting machine for wide, thin materials, producing tiles, flatwork and wall tiles with precise edges and minimal waste.
Steinex CNC Line for Rough Stones
Steinex’ automatic lines have a customised software that allows to manage the production progress both remotely and in real time. The control panel is 10 inches big, touch screen and multilingual. The
Steinex Cement Splitting Plants
Complete plants for splitting concrete blocks and slabs, built around four blade Windstar machines for semi automatic and automatic production.
Steinex Compact Plants and Composite Lines
Compact Igloo and Sherpa plants and composite Menhir lines, combining presses with conveyors and manipulators for higher output and safer working.
Steinex GT Series Plants and Lines
Splitting line for difficult natural stone, with GT technology on Igloo, Broadway and Menhir machines for regular, quality splits where standard machines struggle.
Steinex Handling
Steel twin-cleated laned with back/forth movement and tilting system
Steinex Igloo
- Low hydraulic oil consumption (ex. 250 litres for a 7,5 kW hydraulic unit)
Steinex Machines For Special Finishes
- Hydraulic unit: 7.5 kW splitting + 1.5 kW presser with cooling
Steinex Menhir
For Sawn Slabs, Quarried Blocks, Curbs and Semi-finished products
Steinex Plants for Flaking Stratified Stones
The first plants to mechanise the flaking of stratified stone, using Igloo SFD and Menhir SFD systems controlled entirely by console and joystick.
Steinex Semi-Automatic Lines
Semi automatic Broadway and Sherpa lines for splitting stone with two regular or sawn surfaces, from 200 mm cubes to 1280 mm wide pieces.
Steinex Stone Recognition and Selection Systems
Automatic stone recognition and selection systems that sort material on the splitting line, improving safety, precision and productivity.
Steinex Wind Star
Four blade splitting machine for sawn stone and concrete, applying pressure to all four faces for precise, profiled splits in automatic lines.
Super Spacer Application Table
A work table for applying Super Spacer flexible warm edge spacer to glass during sealed unit assembly, giving the operator a stable, accurately positioned surface to lay and seal the spacer around the glass perimeter.
Super Spacer Applicator & Tools
Hand applicator and tooling for fitting Super Spacer flexible warm edge spacer to glass, giving accurate, repeatable application around the glass perimeter during sealed unit assembly.
Systron Handling
Automated loading and unloading for Systron glass processing centres, using Kuka robots and L or A racks for up to three hours of unattended production.
Systron LOOP
Vertical straight line edging system with 11 cup wheel spindles, grinding and polishing straight special shapes in very little floor space.
Systron WM
Vertical washing and drying station built for Low E and coated glass, with stainless steel construction and washing speeds up to 10 m per minute.
Systron esX-3 Arriser
Vertical glass seaming and grinding machine with soft touch edge guidance, machining contours and radii at up to 30 m per minute without a tool change.
Systron pro
Vertical CNC edge processing centre for seaming, grinding and polishing outer contours to exact dimensions, now with optional helix drilling.
Systron proHD
The most flexible all in one glass processing centre on the market, combining seaming, grinding, polishing and drilling with integrated waterjet cutting in one small footprint.
Systron proMD
Vertical all in one CNC centre that seams, grinds, polishes, drills and mills glass in a single clamping, with optional waterjet cutting for complex shapes.
The ATLANTIC K700 Synchro Butyl Extruder
A PIB Butyl extruder is specialised equipment used in the manufacturing of insulated glass units (IGUs) for applying Polyisobutylene (PIB) sealants. These sealants, commonly known as PIB Butyl, are ap
Triulzi Automatic Laminated Glass Line
Automated line for producing laminated glass, with oven press, overhead assembly with suction cups and an automatic plate preparation and coupling area, in line or U shaped.
Triulzi Compact High Tech Horizontal Washer
Compact, high speed automatic horizontal washer in stainless steel, with automatic Low-E selection, 500 mm automated opening and cascading water saving tanks.
Triulzi Glass Washing Machines
A family company for a global business. A professional staff that listens to you and is attentive to your requirements. An updated team with a passion for every project and that always gives their bes
Triulzi High-Speed Performance Washer
High speed horizontal washer with a 3.5 second cycle time, reaching up to 60 m/min, with latest generation glass tracking and UV Legionella water treatment.
Triulzi Insulating Glass Line
Full automatic line for insulating glass production, with stainless steel VT-INOX washer, acceleration and deceleration conveyors, hydraulic bonding unit and tilting table.
Triulzi Mini Horizontal Washer for Small Glass
Compact horizontal washer entirely in stainless steel for very small glass down to 45 x 45 mm diagonal, with motorised upper section height adjustment.
Triulzi Polishing System Washing Machine
Special washer using the polishing system, with 9 or 11 groups of flat brushes and sponges, ideal for architectural glass, dynamic glass and interior design.
Triulzi Pre Coating Washer with Sponge Brushes
Stainless steel washer for coating lines, with up to four top oscillating flat brush modules, motorised opening, photocell glass detection and a motorised mixer tank.
Triulzi SURF2000 Curved Glass Washer
The world first automatic washing line for symmetrical and asymmetrical curved glass, using robots and CAD CAM positioning, in AISI 304 stainless steel.
Triulzi SY Jumbo Size Horizontal Washer
Jumbo horizontal washer for laminating lines, washing glass sheets up to 3400 mm wide, with high pressure prewash, belt transport and a three fan drying system.
Triulzi SY Low-Emission Horizontal Washer
Horizontal washing machine for low emission (Low-E) glass, with automatic glass selection and automatic thickness adjustment for a high work cycle.
Triulzi Solar Washer for Photovoltaic Panels
Horizontal washer from the Triulzi Solar Division for photovoltaic panel glass, with oscillating flat brush modules, water saving and energy saving devices.
Triulzi Toscana Horizontal Washer for Small Glass
Horizontal washer for small glass sheets from 100 x 50 mm, with motorised height adjustment of the whole upper section and two pairs of cylindrical brushes.
Triulzi Ultrasonic Washer for Automotive Glass
Horizontal washer with a special ultrasonic bath section for the automotive sector, with high tech tanks on wheels and motorised opening up to 800 mm.
Triulzi VFP.2000 Fireproof Glass Line
Automated line for treating fire proof glass, with a high pressure prewash and an automatic vacuum suction system on all four sides of the glass, controlled by Siemens PLC.
Triulzi VOT Coating Removal Washer
Open top vertical washer with a pre wash section for coating removal, ideal for shower glass production, based on the VOT.SP50 body.
Triulzi VOT.SP12 Open Top Vertical Washing Machine
Open top vertical washer for glass up to 12 mm thick, with a mechanical pressing and towing system, ideal for stand alone use in small glassworks.
Triulzi VOT.SP50 Open Top Vertical Washing Machine
Best selling open top vertical washer for glass up to 50 mm thick, with a full AISI 304 stainless steel frame, four cylindrical brushes and high pressure fan drying.
Triulzi VROT.300 Mini Open Top Washer
Mini open top washing and drying machine designed to be combined with a straight line, with a 300 mm working height and glass thickness up to 50 mm.
Triulzi VT2IS Vertical Washing Machine
Closed top vertical washing machine, one of the most renowned in the Triulzi range, with automatic thickness detection and independent motors.
Triulzi VT3IS Special Vertical Washing Machine
Closed top vertical washer with four pairs of brushes and independent motorisation, designed to combine with any machining centre on the market.
Triulzi WPS Wet Powdering Machine
Wet powdering unit for the windshield process, spraying a demineralised water and talc solution with an aspiration filter at 99.995% efficiency.
VTS 01
Horizontal drilling machine for shaped and flat glass, drilling holes from 5 mm to 100 mm in glass 3 mm to 30 mm thick.
VTS 02F
Double sided drilling machine for clean, burr free holes from 5 mm to 100 mm in glass 3 mm to 20 mm thick, with one handed operation.
VTS 03 SCOUT
Double sided glass drilling machine for holes from 5 mm to 100 mm, with clean burr free drilling, motorised vertical travel and precise coordinate control.
VTS 03FP
Double sided drilling machine with motorised two speed vertical travel and a 750 mm drill depth, for holes from 5 mm to 100 mm in glass 3 mm to 20 mm thick.
VTS 04 A-BOXER
Automatic double sided drilling machine that drills from both sides at once with IAI head drives, giving fast, clean holes and touch screen control.
VTS 04 L-BOXER
Double sided drilling machine with motorised two speed vertical travel and a robust frame, for clean holes from 5 mm to 100 mm in glass 3 mm to 30 mm thick.
VTS 04 L-BOXER MAXI
Large format double sided drilling machine on a robust frame, with motorised two speed travel and a 1140 mm drill depth for glass up to 25 mm thick.
VirtualDigitizing
Software that digitises templates into precise DXF files in minutes using a calibrated camera.
Vision System
Automated vision systems for glass and print inspection, screen registration and screen damage detection, with real time feedback to the line PLC.
Water Treatment Equipment
Water Treatment: The quality of water in our glass washing equipment is crucial for optimal results. Choose between Demineralisation and Reverse Osmosis systems. Contact us for advice on RO systems, c
Waterjets
CMS GLASS TECHNOLOGY Official video- ENGLISH VERSION from Stone & Glass Group on Vimeo
xandi Glass
Web app that digitises in-house glass quality control, live within a day.